7 Best GoPro Motorcycle Helmet Chin Mount for Clear Video

Kewig Universal Motorcycle Helmet Chin Camera Mount is the top pick for most buyers. It earns the best gopro motorcycle helmet chin mount spot because its adjustable design fits a wider range of full-face helmets than fixed-position mounts. The mount gives riders a practical way to place a GoPro near the chin bar while keeping the setup compact.

This guide is for motorcyclists who want forward-facing footage without attaching a camera to the visor or tank. Focus first on helmet compatibility, strap or clamp adjustment, and the mount’s material, since a poor fit can cause movement or block vents. Camera clearance and button access also matter on longer rides. The seven picks below are ranked by fit, stability, and overall value, with clear reasons and honest drawbacks for each. That makes it easier to match a chin-mounted camera holder to your helmet and riding style.

Quick Comparison

7 Top GoPro Chin Mounts for Motorcycles

The list is ranked by fit, stability, camera access, and value, counting down to the top pick.

7. Suptig Helmet Chin Mount Action Camera Holder

Best for: Motorcycle riders filming forward-facing footage

The Suptig chin mount attaches an action camera to a motorcycle, motocross, mountain bike, or snowmobile helmet. This package includes two PET mounts, two 3M adhesive pieces, two 1/4-inch adapters, and two thumb screws. Each mount adjusts through 180 degrees, so it can fit rounded commuter helmets and more angular racing designs. Listed compatibility covers GoPro Hero models 1 through 13, GoPro Max, DJI Osmo Action 3 through 6, Insta360 cameras, and some phones, including iPhones with the proper adapter.

At around $20, the two-pack offers a practical spare for another helmet or a replacement mount. The PET material should help reduce direct contact between the helmet shell and mount. Installation uses adhesive rather than drilling, and the mount can be adjusted with one hand. However, the adhesive needs careful preparation. Press it firmly into place, then leave it above 50°F for at least 12 hours before attaching a camera. Removal requires a hairdryer or heat gun to soften the pad, followed by slow peeling.

Pros

• Two mounts let you outfit two helmets or keep a spare.
• 180-degree adjustment supports different helmet shapes and camera angles.
• Includes 1/4-inch adapters and thumb screws for several camera setups.

Cons

• Adhesive installation requires 12 hours before use and careful surface preparation.
• Removing the mount may require heat, and adhesive pads are not instantly reusable.

Check Price on Amazon →

6. Dango Design Gripper Helmet Clamp Mount

Best for: Helmet-mounted off-road camera footage

The Dango Design Gripper Mount clamps an action camera to a helmet chin guard or another thick surface. Its jaw uses flexible front web sections that can conform to uneven shapes, while a dual torsion spring supplies the clamping force. The mount accepts objects up to 2.5 inches thick, so it can also attach to some bars, rails, and other gear. Its universal finger mount works with GoPro Hero cameras from the 4 through 13, GoPro Mini, DJI Osmo, Insta360, Akaso Brave, and similar models.

The useful extras make this more than a helmet clamp. A safety leash adds backup for motocross, enduro, motorcycle, ATV, SxS, and snowmobile use. The package also includes a thumbscrew and short extension, which gives you more positioning options. Remove the helmet from the setup, and the clamp can function as a handheld stabilizer or mini tripod. At around $50, it costs more than basic adhesive or fixed-angle mounts, but it offers several mounting roles in one piece.

Pros

• Flexible front webs fit irregular helmet chin guards.
• Supports cameras with standard universal finger mounts.
• Safety leash adds backup for high-motion powersports use.

Cons

• The clamp only fits objects up to 2.5 inches thick.
• Cameras without a universal finger interface need another adapter.

Check Price on Amazon →

5. SUREWO Motorcycle Helmet Chin Strap Mount

Best for: Helmet-mounted action camera riders

This SUREWO mount attaches an action camera to a motorcycle helmet’s chin strap, giving riders a forward-facing view without drilling or sticking a base to the shell. It supports many GoPro generations, from Hero 5 through Hero 13, plus DJI Osmo Action cameras, Insta360 ONE R, AKASO, Campark, and YI models. At around $16, it is a low-cost way to add a helmet camera setup.

The revised design adds a double-head adapter, so you can extend the setup and adjust the shooting angle. Its one-piece base uses a soft rubber gasket with raised non-slip particles, while the recessed center keeps the softer outer edge between the mount and helmet. That should reduce movement and help prevent scuffs. The elastic buckle is easier to fit than a long loose strap, and the shorter excess length is less likely to press against your skin while riding. Rounded edges also remove the sharp corners found on older versions. Fit still depends on your helmet and camera body.

Pros

• Double-head adapter provides more angle adjustment.
• Soft, textured gasket helps limit sliding and scratches.
• Elastic buckle avoids excess strap rubbing against skin.

Cons

• Compatibility may vary with unusual helmet shapes or camera adapters.
• A chin-strap mount can shift more than a permanently attached base.

Check Price on Amazon →

4. MotoRadds Flex Slim Motorcycle Helmet Chin Mount Kit

Best for: Helmet-mounted action camera riders

The MotoRadds Flex Slim is a chin mount for motorcycle and other action-sports helmets. Its bendable silicone body can rotate and adjust to help aim a GoPro, DJI Osmo Action, Insta360, SJCAM, Xiaomi Yi, or similar camera. At 0.059 kg, or about 59 grams, it adds little weight to a helmet. The mount is designed for adults and teens, and it can fit motorcycle, mountain bike, motocross, slopestyle, and snowmobile helmets.

Its flexible shape is the main draw. A fixed mount may force one camera angle, while this design lets riders fine-tune the view from the chin area. It also claims support for most action cameras and some phones, including iPhone models. Around $35, it costs more than basic adhesive mounts, but the adjustable design may suit riders who switch between cameras or helmets. Fit will still depend on the helmet’s chin shape, strap layout, and the camera adapter used.

Pros

• Flexible, rotatable design allows more control over camera angle.
• Lightweight silicone construction adds only about 59 grams.
• Broad compatibility covers GoPro, DJI, Insta360, SJCAM, Xiaomi Yi, and some phones.

Cons

• Helmet fit can vary because chin sections and strap layouts differ.
• Phone compatibility may require an adapter and can create a bulkier setup.

Check Price on Amazon →

3. Haoyou Helmet Chin Mount Strap

Best for: Motorcycle riders filming forward-facing POV

The Haoyou chin mount uses a plastic holder, silicone base, and adjustable webbing strap. It attaches around a helmet’s chin area instead of using adhesive, so you can remove and reuse it. A buckle controls the strap tension, while the silicone underside adds grip and helps reduce movement. The design also keeps the camera below the rider’s line of sight.

Its 180-degree vertical adjustment gives you room to fine-tune the view. The package includes long and short extension pivot arms, which create more positioning options for different helmet shapes and camera angles. Compatibility covers GoPro Hero 7 through Hero 13, DJI Osmo Action models from Action 3 to Action 6, and several Insta360 and AKASO cameras. At around $10, it costs less than many dedicated helmet mounts. Still, the fit depends heavily on the helmet’s chin design and strap clearance.

Pros

• Silicone anti-slip base helps hold the mount against the helmet.
• 180-degree adjustment supports downward or forward camera angles.
• Long and short pivot arms work with many action camera setups.

Cons

• It may not fit helmets with narrow, sharply shaped, or heavily vented chin areas.
• Plastic parts and webbing may provide less rigid support than metal mounting systems.

Check Price on Amazon →

2. GoPro Helmet Mount, Motorcycle Chin Strap J-Hook Adapter

Best for: Helmet-mounted action camera riders

This motorcycle chin mount attaches an action camera to a helmet’s lower front area. Its Y-shaped base uses ABS plastic with rounded edges, while soft, non-slip silicone helps protect the helmet’s surface. An elastic strap holds the adapter in place and can be removed with one hand. The included J-hook extension gives compatible cameras a forward mounting point without adding much bulk.

The mount adjusts through 180 degrees, so it can fit many round street helmets and more angular racing designs. Compatibility covers GoPro Hero 5 through Hero 13 models, GoPro Max, several Insta360 cameras, DJI Osmo and Action models, plus brands such as AKASO and APEMAN. At around $16, it costs less than many camera-specific mounting kits. Still, some cameras need a frame case or an extra adapter, and those parts are not included.

Pros

• 180-degree adjustment supports different helmet shapes and camera angles.
• Soft silicone contact points help reduce scratches and slipping.
• Reusable elastic strap installs and removes with one hand.

Cons

• Some camera models require a separate frame case or adapter.
• The mount depends on strap tension, so fit and stability may vary between helmets.

Check Price on Amazon →

1. Kewig Universal Motorcycle Helmet Chin Camera Mount

Best for: Full-face helmet action-camera riders

The Kewig Universal Motorcycle Helmet Chin Camera Mount attaches to most full-face helmets with a flexible base and adhesive pads. It supports listed GoPro, Insta360, and DJI action cameras, including newer models such as the GoPro Hero 13, Insta360 X5, and DJI Action 6. At about 60 grams, the setup adds little weight to a helmet.

Two tripod adapters provide up to 180 degrees of angle adjustment, so riders can fine-tune the camera’s view. The snap-fit connection makes the camera and adapter quick to attach or remove. The package includes two adhesive pad sets, an Allen wrench, and a safety tether. Installation needs care. Clean the helmet first, warm the adhesive with a hair dryer for 30 seconds, then wait 24 hours before riding. Around $28, it costs less than many camera-specific helmet mounts, but the adhesive remains a key part of the system.

Pros

• Works with a wide range of GoPro, Insta360, and DJI cameras.
• Two adapters allow up to 180 degrees of angle adjustment.
• Includes backup adhesive pads and a safety tether for added security.

Cons

• Not suitable for helmets with a screen protector.
• Requires a clean surface, heat-assisted installation, and a full 24-hour curing period.

Check Price on Amazon →

Buying Guide

Helmet compatibility matters most because a secure fit keeps the camera steady and reduces the risk of losing it at speed. Choose a mount made for your helmet’s chin-bar shape, not a universal model based only on price.

• Helmet type: Confirm support for full-face or modular helmets, then measure the chin area. A curved adhesive base should contact at least 2 inches of shell surface.
• Mount attachment: Adhesive mounts suit smooth shells, while strap or clamp designs fit some removable chin guards. Look for 3M VHB tape and allow at least 24 hours before riding, if the instructions require it.
• Camera fit: Check compatibility with your GoPro model, Media Mod, and protective case. A standard three-prong buckle should accept your camera without forcing the housing.
• Vibration control: Pick a rigid mount with a short arm, preferably under 2 inches. A pivot with firm locking teeth helps prevent camera drift on rough pavement.
• Weather and release: Seek corrosion-resistant hardware, a drain-friendly design, and a quick-release buckle. A $20 to $60 price range usually covers basic mounts, but verify the included tether and spare adhesive pads.

If you must compromise, prioritize helmet fit and attachment security over adjustable angles or lower price.

Frequently Asked Questions

How do I choose a motorcycle helmet chin mount for a GoPro?

Choose a motorcycle helmet chin mount that matches your helmet shape, uses a strong adhesive or strap, and fits your camera model. A curved base usually suits full-face helmets better than a flat pad. Check the mount’s stated load rating, then confirm it accepts your GoPro case or Media Mod.

What is the safest place to attach a GoPro on a helmet?

The safest placement is usually the lower center of a full-face helmet’s chin bar, where the camera stays clear of your vision and visor. Leave room around vents and the visor hinge. A mount placed too high can enter the frame or press against your face during a sudden stop.

Can I use a GoPro chin mount on any motorcycle helmet?

You cannot use one mount on every motorcycle helmet, because shell curves, vent layouts, and chin-bar materials vary. Most adhesive models suit smooth, clean full-face surfaces, while modular, open-face, and textured helmets may need a strap system. Check compatibility before attaching the camera.

Are adhesive helmet camera mounts reliable for motorcycle riding?

Adhesive helmet camera mounts can hold securely for motorcycle riding when installed on a clean, smooth surface and given enough curing time. A common instruction is to wait 24 hours before mounting the camera, though the maker’s directions control. Heat, dust, rain, and repeated removal can reduce the bond.

Conclusion

Kewig Universal Motorcycle Helmet Chin Camera Mount is the top pick for riders who want a flexible, low-profile way to place a GoPro near eye level. It suits commuters, touring riders, and weekend users who need one mount that fits several full-face helmet shapes. If your priority is the lowest cost or a lighter setup, choose a simpler adhesive chin mount instead, since it may use fewer parts and add less weight. Before buying, double-check the mount’s size range, your helmet’s shell shape and camera compatibility, the package quantity, and the current price. A secure fit matters more than a long feature list when wind, vibration, and road movement can affect footage. Choose the option that matches your helmet first.